Cutting Structure
High quality tungsten carbide inserts with the latest technology are adopted to improve the comprehensive mechanical properties of the bit.
Gauge Structure
Multiple gauge protection with gauge trimmers on the heel of cone,tungsten carbides insert and hard
facing on the shirttail increases holding capability and bearing life.
Bearing Structure
High precision journal bearing with two thrust faces.Balls lock the cone.Hard faced head bearing surface.Cone bearing inlaid with friction-reducing alloy and then silver plated.Abrasion resistance and seizure resistance of the bearing are improved.
Seal and Lubrication
Premium HNBR O-ring,optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability.
Product Application
It can bear high WOB in the conventional drilling.t is suitable for various of formations by matching
cutting structure with different tooth shape,tooth density and tooth exposure height.
Tricone bits
r32xv tricone bit
atx tri cone bit 288mm
| IADC | Applicable Formatitons | Recommended Parameters | |
| WOB KN/mm | RPM(r/min) | ||
| 417/427/437 | Low compressive strength,high il-abilityt and extremely soft formation,like shale,clay.sandstone,conglomerate etc. | 0.35-0.90 | 140-70 |
| 447 | Low compressive strength,high drill ability and soft formation, like shale, clay, sandstone, soft limestone, salt rock,plaster etc. | 0.37-1.00 | 140-60 |
| 517 | Low compressive strength,high dril ability and soft formation,like shale, clay, sandstone, soft limestone,salt rock,etc. | 0.37-1.05 | 120-50 |
| 527 | Soft formation with low compressive, like Low compressive strength, high dilabilityt and soft formation,like shale,clay sandstone, soft limestone, salt rock,anhydrite etc. | 0.35-1.05 | 120-50 |
| 537/547 | Low compressive strength,medium hard formation with hard abrasive interlayer, like Hard shale, anhydrite, soft limestone, sandstone, dolomite with mezzanine, etc. | 0.50-1.05 | 110-40 |
| 617/627 | High compressive strength, medium hard and thick hard interlayer, like hard shale, limestone, sandstone, dolomite,etc. | 0.50-1.05 | 80-40 |
| 637/737 | High compressive strength, medium hard and high abrasive formation, like limestone, dolomite, sandstone, chert, etc. | 0.70-1.20 | 70-40 |
